StreamYard 101: repurposing your content with AI Clips

Hi everyone. Hello. How's everybody doing? Here's Mattel from the team. Uh, very happy to be here with everybody today. Uh, how's everybody doing? Hello. Hi, Joseph. Hello, Robert. I see you. I see everybody in the comment. Good morning. Hi, Andrew. How you doing? We have Latrice from Virginia. Oh, happy new year. Happy New Year, you too. Happy to be here. Uh hope everybody is fresh from the holidays. Uh, got to go back to work now. And uh, yeah, we have Abigail from New England, Irma from North Carolina, Colleen from Idaho. Nice. A bit of a time zone, a time difference since I'm here in Milan. So, it's 6:00 p. m. uh, right now. And uh yeah, today we we're going to have some help moderating the chat. So uh we're going to read all your questions, your com your comments. Uh we have a few Q& A uh slots set up. So um we'll get a chance to go over some of the questions that we uh received when you registered, but also from the chat. Um, but uh our moderator is going to also sneak into the chat from time to uh address some of the hottest questions. And uh as always um we like to keep it respectful. We're a healthy community here. So uh we have a zero tolerance policy on any um language or offensive uh comments. So, oh, okay. Linda, I see you mentioned that my mic is heavy. Is it better like this? Should I turn it down a little bit? Oh, thank you guys. Apologize for that. Is that better? Okay, perfect. Uh, let me know if too low. Okay, I will dial it back now and all right. Um, perfect. Thank you. Uh, keep it coming so that I know uh how it's going and um I was saying that I we have zero tolerance for um offensive uh language. So we'll uh take care of uh such comments in the chat. So thank you. Thank you everyone. Uh yeah. So shall we get started and so we have an agenda today. Hold on. We have a few uh topics to go through. Uh hold on while I share it again in here. And we have um it's showing in the background. Give me a second. All right. So, we'll start off with an introduction to Eclipse. Uh, we'll go through right away with a hands-on demo and then a dedicated session uh with Q& A. We'll also have uh some time to demo a couple of new features that um you asked to uh learn more about and then close off the session uh with a general Q& A. So, just to reply to Chris, um how long is the webinar? We're gonna aim for around 35 minutes today. And um the recording will be available to watch

uh on demand after we finish. So, um no worries about missing uh the webinar live. We also have uh right up here in the corner um a QR code that links you to the survey, the end of webinar survey that we always have. Uh there's a little surprise uh at the end uh for those of you who managed to fill in the survey and I will tell you more about it uh later today. But uh um thank you. Thank you for your feedback, for your inputs. super precious for us. So yeah, let's get right away with a quick introduction to uh Eclipse and what it is and who it is for. [snorts] So, a Eclipse is stream your solution to um automate repurposing your content uh from landscape to portraits uh for short videos and reels that you can share on social media um with captions and other customization options. Instead of manually going through your long form recordings and selecting the moments and clipping them and editing them manually, you can leave that job to AI, which is going to uh look over your stream, pick up the best moments and generate some recordings that are ready um for the real format to be shared online. So um first and foremost I noticed in your questions um a little bit of confusion uh regarding um a clips and shorts and reals. Um Streamyard has historically had a shorts and real section in the editor that lets you um edit your long form content to uh the 916th format. Uh this is different from a clips which is uh an automated solution to generate um ready to be published clips while shortened reels is just a tool that lets you repurpose your content to vertical. But that's just about it. So um brief recap uh for the uh recent update to Eclipse. Let me switch to um my screen share here. All right, we have the new media page that I prepared um I prepared already. So, uh recently we released a major update to a clips uh that includes a few points generating uh clips for longer videos uh and a few different entry points to generate them. Generating multiple times per video. um regenerating by uh custom prompts, editing and customization which includes logo and branding. Uh a clip that feature for uh automating clipping specific parts of your uh stream and uh a few improvements on uh publishing your clips. So first of all uh let's just uh get right away into showcasing in the UI. I have if you see me looking away because I have a bigger screen in front of me. So that's why I'm not looking right at you. But um we have a few different entry points now. So whenever you finish your stream, you can go right into the recording tab. And from here uh for each recording that's in your clips, you see this is a test studio. So you see a bunch of nonsense here. But uh if you go in here, you will see this section where you can immediately click to generate clips. There's also a link that you I suggest you to check out which uh links to our um help center article about a Eclipse and um I'll make sure to go through all of this today with you but you can then go back to it if you want to uh review something and you need to uh check something out specifically some details or um whatnot. So you'll find everything right in that article. So um apart from uh generating clips right from the studio, you can refer to your uh media page. You can generate right from uh the thumbnail of your recording or you can go inside your clip and you'll find uh revamp um media page here. This is part of the update we did. Uh you can see that the sections here are

divided by clips local recordings and edits um showcasing clips that takes up uh the space that's available. So you can see um you can see everything without having to click in it and you know okay what was this clip about? You will have a preview here that you can play back and um a big button here to generate your clips. So this is how you can uh access the uh you can access Eclipse now. So uh hold on. I see somebody is mentioning that the QR code is covering up the interface. So I will temporarily remove it so that uh we free up the space and also maybe I can get rid of the chat overlay so that um you have a cleanest uh the cleanest page as possible. So uh back to the um back to the media page here. Let me take back my notes. Okay, perfect. So uh first thing you can see that there's multiple set of clips. This is because you can now generate multiple times uh clips for a given video. Let's say I generate the first time. It's not exactly what I wanted uh from the AI. So I can generate another set. I can generate again and um have different results from uh the first time. Also, you can see that the first clips here have a tag, a high virality tag. Um, basically the AI takes care of analyzing your video and tells you, hey, this is like what I picked from here uh is great for social media. So, I recommend you to post this clip. So, that's what it's going to tell to you. So uh regeneration capabilities you can regenerate clips and when you regenerate and for example uh you can see here I have a generate again button and when I click on it it's going to ask me uh to have a custom prompt I can type like uh clip that moment where they are talking about uh acquisition as um a strategy for the company. Um and I can uh click on generate with these prompts and uh the AI will uh will generate the clips. I've done I've already um gone and did that uh before the stream. And here I specifically prompted the AI to clip um portions of the video where they were talking about acquisition. This is in Italian. Um sorry about that. So um and you can see that all these clips are about um segments of the video where uh we talked about acquisitions. So, this is a great way to um limit your clips or focus your clips to specific portions. Um, of course, make sure that um you know what you're you want to achieve because depending on what you prompt AI, you might get more or less clips as a result. Um the number of clips that you receive for every generation is not necessarily fixed. Uh of course we try to generate the most uh the highest number possible of clips for your stream but ultimately it depends on your content, depends on the length of your stream, depends on how many uh conversational bits there are into your stream. So, um, the AI is going to try to optimize to get the most out of it. But, of course, if it's short, if it's there's not a lot of, uh, chances for the AI to report your clips. It's going to, uh, generate less clips. And, of course, if you prompt the AI to extract a specific segment from a stream, it's going to uh, be even more targeted. So, it might generate less clips. So, just keep that in mind when you uh are out there and generate clips. Uh so by the way I we're not going to lose the question all the questions that you you're asking. Um we are starting them and uh in the Q& A section we're going to go through them. Uh so feel free to keep them coming. Um I'm not going to read them just yet but um just keep them coming. I will uh I will have a look at them later together with you. And so

uh when you regenerate you can prompt the AI but uh sometimes you can see from here sometimes you see uh landscape clips. Uh some of you have asked this uh even in your registration form for the webinar and this ultimately depends on um the format of your stream. uh whether you're switching layouts a lot or um if the original layout makes it difficult for the AI to clip a specific portion of the uh of the person. Of course, the team is constantly trying to improve this and uh enhance the sensibility and the precision of the eye, but keep in mind that these results might be expected depending on the original layout of your video. And so, uh let's get into the nitty-gritty of this update, which is the editing capabilities. So previously with AI clips, you could generate assets uh for your videos and that was it. Uh everything was automated. There was not many opportunities to uh edit them uh without using external software and we wanted to change that. We wanted to give you control over what you can uh do with your clips before publishing them and without uh going out of streamer itself. So you can see that below each of these videos uh each of the clips I have an adjust button uh to adjust the timing, the captions and the logo of an air clip. This is all through the the new update that we uh we just released. So let's try and enter one of those. We click on adjust and we enter the editor. Just a couple seconds that everything loads. [snorts] Perfect. Uh, by the way, for those of you who are watching on YouTube, we are going live both uh portrait and landscape at the same time. So, if you're looking from your phone, uh it's defaulting to mobile, but if you look at our YouTube account, you should also be able to find the desk the landscape version and um that might suits your screen or your um usage better. So feel free to check that out. So here we are in the new Eclipse editor. Um you can see there's a lot going on here. So there are captions, uh font, color, logo, layout, placement, and uh a bunch of more stuff. This is uh everything that you can do uh to edit your clips right out the box. So first of all you have caption style. You can choose a visual style for captions uh from a sets of predefined styles. Uh this is classic. You can see it's changing in um in real time minimal outline color outline block hue highlight and minima highlights. So from for these captions, you can customize the color of the caption. Um you can simply use the color picker and customize it or just paste the um hex code for it. Uh you can customize the font. I don't know like what's your favorite font. I think there's one that I particularly like a silc screen. I love this one personally. like um might not be the most readable if you want to publish it, but I really like the style. Uh and then you can change the size of it. So you can make it uh more or less uh visible. You you can then um there's a section on lo on logo. word and placement. Since we're talking about captions, I'm going to go through with word layouts and placement. Uh you can see that you can uh limit the caption to have just one word or you can limit it to uh one line uh multiple like two lines or um three lines. Oh, sorry about the duck. I will get rid of it. Okay, that's better. Uh sorry about that because um it was hiding uh my presentation. So apologies for that guys. Thank you in the chat for letting me know. Um again I'm looking at another screen so I've I'm trying to keep uh everything under

control. Thanks. Um what where was I? Okay. So yes, word layouts. You can change the layout of the words. um and have uh one line, two lines, three lines, or just a single word at a time. You can also fully customize the placement of uh your captions. Let's say I want them in the center of my clips. I want them on top or whatever corner. Um also because you can see that uh you can tweak the vertical spacing or the horizontal spacing sorry um as much as you like. So you can really just put the captions wherever you want them to be. So uh that's great to um position them in a position that sorry for the double word there. um where uh it doesn't interfere with your content uh of your clips. So um logo watermark uh you can add a watermark. Uh this is um reserved for paid plans. Oh yes, for all plans uh you're able to edit your clips. So from free to paid uh you are able to access the editor and uh customize your captions, your placements, word layout, everything. The only thing that is reserved for paid plans right now it's um the logo watermark. On the free plan, you're going to have a default uh stream logo. Uh while on paid plans um it's going to default to no logo and you can upload your own and uh customize the placement just right like you can do it um in your studio. Just one note the logos that are included in your media assets for your streams are uh separate from the logos that you can use for your a clips. So, just make sure uh to uh have them ready and upload the ones that you want to use with Eclipse right into um your editor here. [snorts] Uh that's just something to keep in mind because uh you might be wondering why I don't find my logos. That's because it's two separate things and it has two separate buckets, let's say, where we keep all your files. Um finally uh for a clip sometimes uh the in general the um tries its hardest to find the best moments for generating a clip that can be published and it doesn't interrupt the speaker. Uh it's goes from the start of a sentence to the end of a sentence. But um we wanted to give you more control to include a bit more or a bit less of uh the footage. So in the editor you can see that you can uh adjust the time here. And not only you can trim down. So shorten your clips, you can also make them longer. uh because we automatically generate up to um one minutes on both ends uh additionally uh from what's shown in the clips that you uh generate and your get from the AI. So that for example you can shift the clip to start a bit earlier or you can uh shift it to start uh to end a bit later. Uh, one thing also that you might not be uh aware of, you can [snorts] um hold on. You can move your cursor uh in the middle of the clip and then you can split select two different um two different sections of the generated footage so that you can automatically um clip let's say and stitch uh a couple of segments or bits or more to generate the end recording. So that's really nice when something is great, then something you want to uh take it out and something else uh comes down the line that you want to include in your uh final clip. Just to uh let you see again um from the editor here uh I go with the uh cursor and this marker here. I drag it in the middle of the clip. Well, uh where we want to uh clip it. Then there's this

button here. We also have a keyboard shortcut uh which is split. And then you can move freely uh one of these two um highlighted part and that is going to select the two portions. So when you save and you click on save, the end clip is going to stitch them automatically together. Uh I think this really makes um makes everything much smoother and allows you to have some editing capabilities bright inside stream without having to uh stitch and split stuff uh outside with a with an offline editor. [snorts] So this is the transcript. You can um you can scroll right to different section of what's highlighted and some of you asked about editing the transcript. Uh right now it's not possible to edit the transcript and the captions to um highlights or to rework some section but uh it should um it's something that we're looking into. So keep the feedback coming and uh thank you so much for um your interest in this feature for um for Rachel. Uh Rachel mentioned about the shortcut. If you hover uh on the bottom you can see the shortcut is always listed there is the slash uh the slash character. So every time you hover on these buttons you can also see the um related keyboard shortcut. So uh that's something you can uh you can have a look and so you can see that we have a few option on top to save uh publish or save as new. If you save, uh, this is going to overwrite the original clip that, uh, you generated. But if you save as new, it's going to save the edited clip as an edit. So, it's going to be separate from, uh, the clips that you got from the it was generated. So, uh, it's going to, uh, save it separately. You can to like you can toggle this uh switch to set all these settings as a default which means that let's say I style my clip. I style it up like this. I adjust the size. I have my word logo. layout. I have exactly uh the placement that I want for all my clips. If I then toggle this to set it as default, it's going to uh apply automatically these edits to all the new clips that you generate. So once you find a combo that works for you, uh you don't have to waste any more time into reapplying that to all your clips because it's just going to um it's going to be applied automatically to all your clips. and then you can uh publish directly from the editor. But I'm going to get into uh publishing in a second. So right now I'm satisfied with it. So I can click on save and uh it's going to bring me back here. And you can see that it's in creating. So uh it's going to uh take a little bit of time to rerender the video and uh finalize the edited clip. Um, just wanted to play uh a bit of this clip. Uh, I don't think you can hear audio. I don't think so. But, uh, this is just what a clip uh will look like. the um in here you can see that uh the person speaking is on top it's the AI is going to try to optimize the positioning of the people speaking uh especially if you have multiple people like more than two people speaking it's try it's we will try to uh includes um footage from the people that are actually intervening in the conversation. So, uh that's uh the ultimate goal of uh the this um AI AI job. So, before getting into publishing, I just wanted to um highlight the uh clip that feature. So, what's clip that and how does it work? um when you're live streaming you or

you're recording you might want to uh highlight a specific section of your stream so that when you generate clips it gets turned automatically and uh for with certainty into a clip. Uh in that case you can say clip that while recording and once you go back you end the stream and you go into uh generating clips the will automatically include 30 seconds before you set uh clip that and turn that into a clip. Now we received some feedback from you guys that mentioned that um you'd also like to have a shortcut uh to do that silently. Uh the team is looking into that. So thank you for the feedback. Right now um you will need to uh say clip that during your stream and the AI will pick that up and will automatically turn the 30 seconds before you say that sentence uh into an a clip once generating. So that's how clip that works. There's um just for a note uh Eclipse works in many languages not only in um in English. You can uh check the full list in our um help center article but currently uh these are the language that are supported. Um, so if your stream is in either of these languages, uh, it's going to generate a transcript and it's going to generate, uh, a clip. So, um, keep the feedback coming. If you want, uh, if you want us to add new languages, uh, um, feel free to open a ticket with feedback suggestions and, uh, the team will be gladly, uh, collect them for future improvement. [snorts] So, um, let me go back and check my notes. So, finally, publishing to socials. Uh, you can publish the clips right from Streamyard. Uh, you can see this, uh, share icon here below your clip. You can click on it and you can publish your repurposed videos to um, reals destinations. These destinations are separate from the ones you usually stream to. So you will have to add um them specifically here. For example, we have right now we have YouTube shorts, Facebook page, reels, linking profile, Instagram and Tik Tok. Uh these are uh currently the destination supported for uh clips uh which means for reals, for shorts. So just select uh the destination you want it to be published to. uh change the description which is going to be the title of your clip and select the privacy when where it's supported. So uh feel free to uh try it out and publish them to your social media and yeah this is about publishing right now. um one note. Previously you were able to post up to uh 60 seconds clips. Now we upgraded it to up to 3 minutes long. So you can publish 3 minutes long clips uh short clips or reals and um they will go right through uh to your destination. Another note on this. Now you're able to generate clips for videos up to 6 hours long. Previously you could generate only for videos up to two hours long. So we uh decided to increase those limits as well. Uh great. So let me check my notes. Uh finally I wanted to address um the AI clip generation limits. So I wanted to briefly touch on why we introduced limits in generating uh and uh what our plans about them are. So before uh this major update to Eclipse you could generate clips only once per stream. You could not retry you could not regenerate them and uh you could not edit them in any way. uh video generation and video editing with AI is uh can be a pretty resource intensible uh operation. So we decided to based on data for historical usage for each plan to introduce limits uh to balance availability and resource usage. That said, we hear your feedback. We received um we received uh your comments about limits and how you would like to have uh more available clips. So uh I

wanted to know let you know that the team is actively looking into this and the limits are not uh final. We really want to strike the right balance between your needs and resources. So, um you'll hear more about it, uh in the coming weeks, but uh thank you for bringing this up and um yeah, we just wanted to let you know on this note. Um I was saying um I was talking about a little surprise for those of you who complete the survey uh after the webinar is ended. I'm temporarily going to put back the um the QR code here and then I will also post it in the chat. Um but for those of you who are able to complete the survey, we'd like to offer six uh AI Eclipse generation credits for free this month. So uh that's just a little thank you for um for your feedback and for sharing your opinion which uh really matters for us. So um thank you so much again for your support and u perfect. So all right so QA time let me go back to speaker view. Hi everybody. Uh now you can see me in full resolution again. Um I have prepared a couple uh of questions from um the registration survey that we ran uh for the webinar and I'm going to go through a couple of them before uh moving over to the floor questions. So first up we have Enrique. Uh, Enrique asked, "How does AI clips decide which moments are highlights and can we customize the criteria like engagement, keywords, speaker, etc. " Um, so how does a clip decide which moment to highlight? So AI Eclipse uh will scan your video especially for conversations and we'll look into the content of those conversations and we'll try to pick up moments that are engaging that are interesting for um an audience to see and to hear. So that's how the AI is able to highlight those moments. Right now it's not possible to customize the specific criteria which um are part of our own algorithms and um and studies. But with the clip that feature and with the prompting when you regenerate clips, you're able to um guide this selection either directly with clip that so it picks up the 30 seconds before or with um prompting. So you can tell it, hey um extract the segment where I talked about pasta or I don't know like I talked about whatever or if you have multiple people um as long as those people can speak um are speaking clearly during the stream, you can even uh tell the AI to clip specific moments of uh when someone said uh a specific thing and that's how you can customize those criteria right now. Uh I will go to another uh question from the registration. So Andrew asked is a clip that feature unlimited? I stream for eight to 12 hours a day and this will be insanely amazing if it's separate from the eye. Just want to clip or mark things with my voice. currently clip that uh you can say clip that how many times you want the generation for clips is still going to be subjected to the limits for your plans for your plan. So um since clip that extracts the clips once you generate the clips that's going to be uh tied to the limits that you have on your account. [snorts] And one last question from the u the audience um the registered audience let's say uh Andrea asked when creating AI clips is there a prompt or strategy to achieve a particular result with your clips. So for prompting uh as I was mentioning you can when you regenerate a clip you can prompt specifically with the text inputs but for strategy my recommendations are uh to keep

I would recommend to minimize layout switching uh during the live stream if you plan to uh generate clips because uh that helps the AI in keeping track of who's speaking and uh to provide a better results when stitching it together. Um ensuring that the speakers participants can be seen clearly during the stream. So the clearer your participants are, the clearer their faces are, the be better the quality of your webcam is um the better the results are going to be as well. Uh and finally, screen sharing might impact the quality of your results. So heavy screen share uh in your stream might impact the amount of clips that the is able to extract since it's optimized for uh conversation and um let's say interview format. Uh perfect. So these were the questions from the registration. I'm just going to pick up a few questions from uh the audience. Let me go through them. Um LD Robinson asked will we be able to modify caption text to make corrections? Uh as I mentioned before currently it's not possible but um I've collected the feedback even from the registration so and I'm sharing it with the broader product team. So um we are putting in our internal discussions and hopefully we'll be able to achieve that for you guys. Uh, Ray Dia, I hope that I pronounced your name correctly, but how soon can we use this feature? AI Eclipse, this major update for Eclipse is available now. So, you can use this feature right away, even today. [snorts] Just a shout out. Thank you, Colleen, for uh the support. and Sethia. Um, no AI clips are available on all plans, including the free plan. Each plan has uh different limits on how many clips you can generate per month. Uh, we are still uh defining and putting a the final touches on the amount that you are uh that you have available for a month. But apart from editing the logo on your clip, everything else is available also for free. And Fad say asked, can you change the genic caption color font size? Yes. Uh you can refer to the demo that we did before once this shows ends um or the app center article for further instructions. [snorts] Thank you Carrie for a shout out. I love you too. And Andy, uh, is the default saved across brands or is it just for the current brand? Since a clip uh a clip settings and content is separate from the brands is going to be uh saved as default across your brands uh inside your specific team. And Tommy asked uh if the option resets after a certain amount of time. And yes, it's it resets each month. Um, so that uh allowance of credits will reset each month uh for every plan. And make sure to fill in the survey at the um QR code here so that you can get uh six free generations for this month. All right. So, uh we are running a bit tight on time, but I still wanted to uh showcase a little bit some um new features that we introduced recently. So, uh for for Ashley, just a reminder for everybody, yes, this webinar is recorded. So, it will be available um on demand after it ends. So, no worries about that. you'll be able to running it back uh with the recording. So, just uh just show not showcase but like uh yeah just a brief showcase of the recent features that we introduced. So, let me go back to my shared screen. All right, here we go again. I'm going to turn off the comments and the uh QR code for now so that you can see everything clearly. So, uh, first up is, uh, timers on banners. So, when you go

into the banners here, you can see that, uh, when you edit it, you're going to have the option to set a timer. Right now, you can show your banner for 10 seconds, 20 seconds, or 1 minute. after this time the banner the comments sorry the banner will disappear automatically. So let's say I show uh this for 10 seconds I save it I show it and you'll see that uh as soon as this timer resets it's going to be uh it's going to disappear uh automatically. uh we received I noticed that a lot of you are interested in this feature and we received a lot of feedback about it about uh customizing the duration of the time or applying to other elements as well. Uh again I've shared this feedback with uh everybody on the team. So hopefully we'll be able to introduce these changes soon as well. And another thing that a lot of you all have asked is the chat overlay. For this one, I'm going to switch back to um the view right here and show comments on and show the chat overlay directly. So the chat overlay you can uh tweak the size and the font for example from this is the regular uh size. I can make it tall. wide and I can change the font to be medium or small or big, which is the one I was using before to adjust visibility across um um across your streams. [snorts] And you can uh go back to speaker view here. I'm going to hide this. And you can ah you can to show it you need to create a stream. So I'm just going to quickly uh put another one here which is private so that's we can I can show it to you in [snorts] the comment tab here you can see show comment on stage and you can uh appear it here make it appear here and from this settings dropdown you can select the size and the font. So uh this is a way you can customize your chat overlay um on for your viewers. Then uh the latest update that I wanted to showcase with you is AI backgrounds. So in your media assets app we all know that you can uh upload backgrounds or choose from the set of uh backgrounds that are available from um by default on streamer. But now you can also generate them with the AI. So for example, you can you see this uh prompt window that appears here. I can type let's say um a pattern of cute ducks in a pond. And you can create um you can create a background just like that. It's going to take a little bit of time uh for the AI. And then look at the test. That's so cute. Uh and then you can save it or you can generate again if the results um you're not satisfied with the results. So and then just like that uh you have your background the customized backgrounds uh whenever you want. You don't need to um waste any time getting out of StreamYard or um designing them yourself. uh just right from your media assets tab. And yes, so these were the features that I wanted to highlight for today. Uh I have a few questions lined up, but let me just check uh on in chat if there's something that you wanted to uh to ask. So uh thank you Sabrina. I appreciate that. Uh, thank you Marty. I appreciate the support. [snorts] Um, I have a few questions from the registrants that I want to share. These are general questions. Uh, they're not related necessarily to the um features that I just showcased, but I wanted to bring them up. — [snorts] — So this is something that's been asked uh a few times already which uh JP asked when will be able when will we be able to remove the streamer branding from QR codes on uh advanced plans. So uh this is a feedback that we heard a few times

and uh we already we're already discussing it internally. So hopefully we're going to be able uh to bring a revamped QR code feature to y'all so that you can remove um you can remove the branding. Uh let me uh now speaking about QR codes, I'm going to um put the QR code for the survey here. Remember to fill it out and you have uh six free AI Eclipse generations for the month uh if you fill it out. So um just remember that there's that option. So another question that I wanted to showcase is from Olympia. This touches on the core of streamer and she asked, "I would like to understand why I can only have six people on live stream when he says I can have 10 seats on a core plan. " So um you have the seats that you have. Um you can uh add as many people uh as you have uh as your seats but most of the time for example the core plan when you refer to 10 um to 10 seats usually in those cases it's 10 destinations um uh sorry 10 participants 10 on screen participants. So, um, make sure that you are up to date with the limit. Uh, oops. Okay. Can you still hear me now? Yes. Sorry for I disappeared uh for one second, but I think everything is is good. — [snorts] — Uh finally, Canvas asked, "Could you please guys introduce a monthly subscription, please? " Um Canvas, uh remember to go to streamer. com/ plan — [snorts] — uh and you will find our current plan which in also include monthly subscriptions. So uh you have an option to uh to pay yearly or monthly. So that's something that's available uh right now. Uh let me check uh the chat. [snorts] Katrina, as a show producer, I wish I could talk to my host without having to come on camera to give them direction. Is this ever coming? Um this is uh actually a great suggestion. Uh currently we do have uh an option for private calls on our business plans. Um we do have something coming up soon for the in studio chat to let your to notify your guests um whenever you want to um grab their attention. I'm not going to spoil too much about it, but it's coming very soon and it's going to let you um to let you mention directly um someone that's in the studio with you. So, um that's going to make uh grabbing attention of your participants much uh much easier. [snorts] Let me check. Uh we have we are already over time so I'm just going to go through a couple more questions. Uh but um but yes so just a reminder here you can find um uh sorry about that. Uh you can find a QR code for sorry the other way. uh the survey about this webinar. Uh if you want more live streams, you want these webinars to keep coming, uh please uh submit the survey. It's going to help us a lot. And uh as a thank you, we're going to offer six uh free Eclipse generation this uh this month. So yeah, uh I think we can end it here today. Uh thank you everybody for participating. I'm just going to uh share in the chat Sorry guys, my microphone got uh I stumbled on the connector and it uh broke off. So, apologies for that. Uh in the chat, you can find the link to the survey for the webinar. uh you can find in cure code also in the chat and uh you will be able to watch this webinar back again with a recording. So thank you so much for joining again us today and I hope uh this gave you a bit more context and help in uh using clips and the latest feature here at Streamyard.

Thank you. Thank you so much again and happy new year everybody. And um thank you, thank you Sabrina, thank you Rabbi, thank you Charlotte. Appreciate it. Thank you so much. Thank you Kyle. Happy New Year Andrew. Bye everybody. See you soon.